Free Printable Halloween Bingo Game Cards With Free Printable Halloween Bingo Cards For Large Groups Plus Free Printable Preschool Halloween Bingo Cards
Peggy the peg Art Skeleton is made from sprung clothes pegs and a wooden spoon. Peggy s arms and legs all move at their joints because the peg limbs are joined on the inside with wool to make the peg art moveable. Peggy makes a great Halloween toy or a Halloween decoration to make your house look spookier on Halloween. To make Peggy the Peg Art Skeleton you will need... Wooden Sprung Pegs (dismantled and all the springs discarded except for 6. You may wish to use some pegs as clamps whilst the glue dries.) Wood Glue Wool or String Paint Skeletons Ribs The skeleton ribs are two peg halves joined together at the tapered ends and overlapping one another about the same distance as the spoon handle is wide. Make and sick 6 ribs to the wooden spoon handle. The bottom set of ribs should not stick out as far as the ribs above so make the overlap bigger on this rib. Make sure you leave the skeleton a neck and leave some of the bottom of the spoon handle available for the pelvis bone.
You might need to use needle-nose pliers to do this. To make a pendant poke an eye pin into the candy corn as described for the earrings. Now the pendant is ready to bake. 5. Bake your candy corn creations according to the package. I baked mine for about 10 minutes at 275F which worked well. 6. (Optional) After the candy corns have cooled you could spray them with acrylic sealer to make them glossy and have a more complete look. This may take a few hours to dry completely. The above suggestions are just a few ideas for how you could use these cute clay candy corns. Take a minute and think of other fun and creative ways you could use these little embellishments. On clothes or on a costume? In a table setting for a party? Maybe on a throw pillow? There are so many possibilities for these little candy corns.
You might want to use pliers. Braid them together and make them into a wreath/circle by twisting the top hooks together. Next tear or cut pieces of paper... about a foot long and wide. Pinch the paper strips in the middle and crunch it up as if you were making a flower. Tuck the "paper flowers" into the little holes in the braided wires and pull tight. Fill up your wreath to fullness! Spray paint it! About three coats of paint is good with about 50 minutes drying time in between. Use the kind of spray paint that holds up outside (in case of rain). Please do the spray painting outside or in a well ventilated room. Cover tables with those inexpensive plastic tablecloths. When the paint is good and dry attach the decorations with the hot (low temp is fine) glue gun. Just be careful not to burn yourself. Adults and older kids should be the glue gunners. You are done! Hang it up on your front door maybe with an orange light aimed at it.